One Stop Solution Service Provider for eco-friendly bags Products

ShIP to

Terminology of luggage and bags and terms of cutting process for processing methods

by:Xilong      2020-03-22
1. Hot raw materials: due to the wrinkles of the original and auxiliary fabrics during transportation and storage, which seriously affects the cutting quality of the cut pieces, the raw materials should be carefully ironed before cutting, make the fabric flat and wrinkle-free. 2. Discharge: arrange reasonably on the original and auxiliary fabrics according to the shape characteristics and quality requirements of the component template, minimize the loss rate of materials, and work out the corresponding material quota value. 3. Paving: paving on the platen according to the requirements and standards of the sample. 4. Sample drawing: use the sample plate to reasonably set the outer contour lines of the parts chat piece on the surface fabric of the auxiliary materials according to different specifications as a sign of cutting. 5. Recheck the sample: recheck whether the quantity and quality of surface scribing meet the requirements of technical regulations. 6. Cutting: use special cutting tools to cut according to the sample lines. 7. Drill hole: use the cutting tool to make sewing marks on the cutting piece to ensure the accuracy of the sewing part and size. Generally, the marks should sit on the seaming part so as not to affect the beauty of the product. 8. Powder printing: make sewing marks on the cut piece with scribing powder, usually as temporary marks. 9. Number: the number of the cut pieces should be numbered in sequence, and the number of the parts on the same piece of luggage should be the same. 10. Check the cutting edge of the cutting edge: Check whether the size and position of the cutting edge meet the quality requirements. 11. Spare Parts: all parts and materials required for a luggage product. 12. Inspection: check the quality and quantity of cut pieces. 13. Repair defects: repair defects or minor leather injuries that can be repaired in the patch. 14. Changing films: changing films that do not conform to the quality. 15. Section consumption: the loss caused by material breaking after the gray cloth is laid. 16. Cutting consumption: the loss caused by the gray cloth after paving in the cutting of the sample. Recommended Related reading: inspection technology terms of luggage terminology and processing methods sewing terms of luggage terminology and processing methods
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...